Atlantis Land I-Storm A02-RA(Atmos)_ME01 Manual do Utilizador descarregar pdf (Página 55)

ppp 2 remoteip 192.168.200.2

ppp 2 enable

(and the corresponding setup for each of the channels 3 to 8 as well)

Clients can now dial in to this server, be allocated IP addresses and traffic will be

sent to and from the router.

8.2.4 Remote Bridging

To create a system where two bridges are connected by a PVC, do the following at

each end: (In this example, interface 2 is attached to the bridge in ATMOS (interface

1 is reserved for routed traffic).)

bridge device add ppp/DEVICE=2

(Attach interface 2 to the bridge.)

ppp 1 pvc 32 mac

ppp 1 interface 2

ppp 1 enable

If required, multiple interfaces can be attached to the bridge of a single ATMOS

system so that a single master site is bridged to several satellites. Each incoming

bridging PPP channel should be attached to a distinct interface. Each interface must

be independently attached to the bridge.

8.3 <channel> clear

8.3.1 Syntax

<channel> clear

8.3.2 Description

Clear all aspects of this channel back to their default settings. If there is an active

connection, it is torn down.

8.4 <channel> disable

8.4.1 Syntax

<channel> disable

8.4.2 Description

Clear the enable flag for a PPP channel. This is the default setting. Disabling does

not remove other configured information about this channel.

In the PPP state machine, this sets the PPP link to closed. If it is already closed, there

is no effect.

Configuration saving saves this information. By default, all channels are disabled.

8.5 <channel> discard

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 111 112

Sem comentários

Atlantis Land I-Storm A02-RA(Atmos)_ME01 Manual do Utilizador Página 55