Atlantis-land DiskMaster F301D Manual do Utilizador descarregar pdf (Página 46)

ENGLISH

DiskMaster 46

1.9 Hard Disk setup

If the hard disks are being installed for the first time, you need to initialize

the disks before you can use them. Follow the steps described below.

Open the web browser, enter the local port IP address of this

DiskMaster, which default at 192.168.1.1, and click Go to get the login

page.

The default username is admin, password atlantis and click “OK” to

continue.

To configure your DiskMaster, you will need to use the

web browser, enter the IP address and then use the web

configuration for further setup. To find out the IP address

(if You changed) of your device once it is connected to the

network, there are several different ways as described on

the following pages.

Use the Setup utility included on the CD

(CDRom\Utility\SetupUtil.exe). This will list the device

automatically and allow you to access the web

configuration interface with a simple click of your mouse.

 Insert NAS system CD-Rom in to your computer, and

run “Setup utility”.

 Pressing the Setup button.

 NAS in the same subnet will automatically show up in

the device list.

Make sure NAS system has probably connect to the

network and search again. You might have to configure

your firewall or even temporarily turn it off.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 60 61

Sem comentários

Atlantis-land DiskMaster F301D Manual do Utilizador Página 46